Product Details:
| Capacity | 100 CFM |
| Maximum Pressure Bar | 16 |
| Connected Load | 0.67 kW |
| Dimensions | 30x26x34 Inch (LXWXH) |
| Brand | Empire |
| Model No | ECLD-010 |
Warm, Moist Air Enters:
Compressed air from the compressor is warm and contains water vapor.
Pre-Cooling (Optional in Some Models):
In some models, incoming warm air is pre-cooled by outgoing cold air using a heat exchanger.
Refrigeration Cycle:
The air passes through an evaporator where a refrigerant cools it down, typically to around 3°C (37°F).
At this temperature, water vapor condenses into liquid.
Moisture Separation:
The condensed water is removed by a moisture separator and drained out via an automatic drain valve.
Reheated and Out:
The dry, cold air is reheated by the incoming air or by a reheater coil to prevent condensation in downstream piping.
Product Details:
| Capacity | 500 CFM |
| Maximum Pressure Bar | 16 |
| Brand | Empire |
| Voltage | 415 V |
| Frequency | 50 Hz |
| Phase Type | Single Phase |
Warm, Moist Air Enters:
Compressed air from the compressor is warm and contains water vapor.
Pre-Cooling (Optional in Some Models):
In some models, incoming warm air is pre-cooled by outgoing cold air using a heat exchanger.
Refrigeration Cycle:
The air passes through an evaporator where a refrigerant cools it down, typically to around 3°C (37°F).
At this temperature, water vapor condenses into liquid.
Moisture Separation:
The condensed water is removed by a moisture separator and drained out via an automatic drain valve.
Reheated and Out:
The dry, cold air is reheated by the incoming air or by a reheater coil to prevent condensation in downstream piping.
Product Details:
| Capacity | 500 CFM |
| Brand | Empire |
| Model No | ELDC-050 |
| Maximum Pressure Bar | 16 |
| Connected Load | 2.70 kW |
| Dimension | 48x26x39 Inch (LXWXH) |
Warm, Moist Air Enters:
Compressed air from the compressor is warm and contains water vapor.
Pre-Cooling (Optional in Some Models):
In some models, incoming warm air is pre-cooled by outgoing cold air using a heat exchanger.
Refrigeration Cycle:
The air passes through an evaporator where a refrigerant cools it down, typically to around 3°C (37°F).
At this temperature, water vapor condenses into liquid.
Moisture Separation:
The condensed water is removed by a moisture separator and drained out via an automatic drain valve.
Reheated and Out:
The dry, cold air is reheated by the incoming air or by a reheater coil to prevent condensation in downstream piping.
Product Details:
| Capacity | 150 CFM |
| Model No | ECLD-015 |
| Maximum Pressure Bar | 16 |
| Dimensions | 34x19x33 Inch (LXWXH) |
| Brand | Empire |
| Connected Load | 1 kW |
Warm, Moist Air Enters:
Compressed air from the compressor is warm and contains water vapor.
Pre-Cooling (Optional in Some Models):
In some models, incoming warm air is pre-cooled by outgoing cold air using a heat exchanger.
Refrigeration Cycle:
The air passes through an evaporator where a refrigerant cools it down, typically to around 3°C (37°F).
At this temperature, water vapor condenses into liquid.
Moisture Separation:
The condensed water is removed by a moisture separator and drained out via an automatic drain valve.
Reheated and Out:
The dry, cold air is reheated by the incoming air or by a reheater coil to prevent condensation in downstream piping.
Product Details:
| Capacity | 750 CFM |
| Brand | Empire |
| Maximum Pressure Bar | 16 |
| Connected Load | 3.80 kW |
| Dimension | 65x36x48 Inch (LXWXH) |
| Voltage | 415 V |
Warm, Moist Air Enters:
Compressed air from the compressor is warm and contains water vapor.
Pre-Cooling (Optional in Some Models):
In some models, incoming warm air is pre-cooled by outgoing cold air using a heat exchanger.
Refrigeration Cycle:
The air passes through an evaporator where a refrigerant cools it down, typically to around 3°C (37°F).
At this temperature, water vapor condenses into liquid.
Moisture Separation:
The condensed water is removed by a moisture separator and drained out via an automatic drain valve.
Reheated and Out:
The dry, cold air is reheated by the incoming air or by a reheater coil to prevent condensation in downstream piping.
Product Details:
| Capacity | 1000 CFM |
| Brand | Empire |
| Model No | ECLD-100 |
| Maximum Pressure Bar | 16 |
| Connected Load | 5 kW |
| Dimensions | 70X59X70 Inch (LXWXH) |
Warm, Moist Air Enters:
Compressed air from the compressor is warm and contains water vapor.
Pre-Cooling (Optional in Some Models):
In some models, incoming warm air is pre-cooled by outgoing cold air using a heat exchanger.
Refrigeration Cycle:
The air passes through an evaporator where a refrigerant cools it down, typically to around 3°C (37°F).
At this temperature, water vapor condenses into liquid.
Moisture Separation:
The condensed water is removed by a moisture separator and drained out via an automatic drain valve.
Reheated and Out:
The dry, cold air is reheated by the incoming air or by a reheater coil to prevent condensation in downstream piping.
Product Details:
| Minimum Order Quantity | 1 Piece |
| Capacity | 60 CFM |
| Model No | ECLD-006 |
| Maximum Pressure Bar | 16 |
| Connected Load | 0.45 kW |
| Dimension | 24x21x31 Inch (LXWXH) |
| Brand | Empire |
Warm, Moist Air Enters:
Compressed air from the compressor is warm and contains water vapor.
Pre-Cooling (Optional in Some Models):
In some models, incoming warm air is pre-cooled by outgoing cold air using a heat exchanger.
Refrigeration Cycle:
The air passes through an evaporator where a refrigerant cools it down, typically to around 3°C (37°F).
At this temperature, water vapor condenses into liquid.
Moisture Separation:
The condensed water is removed by a moisture separator and drained out via an automatic drain valve.
Reheated and Out:
The dry, cold air is reheated by the incoming air or by a reheater coil to prevent condensation in downstream piping.
Product Details:
| Minimum Order Quantity | 1 Piece |
| Capacity | 20 CFM |
| Brand | Empire |
| Connected Load | 0.21 kW |
| Dimensions | 20x17x25 Inch (LXWXH) |
| Model No | ECLD-002 |
| Maximum Pressure Bar | 16 |
Warm, Moist Air Enters:
Compressed air from the compressor is warm and contains water vapor.
Pre-Cooling (Optional in Some Models):
In some models, incoming warm air is pre-cooled by outgoing cold air using a heat exchanger.
Refrigeration Cycle:
The air passes through an evaporator where a refrigerant cools it down, typically to around 3°C (37°F).
At this temperature, water vapor condenses into liquid.
Moisture Separation:
The condensed water is removed by a moisture separator and drained out via an automatic drain valve.
Reheated and Out:
The dry, cold air is reheated by the incoming air or by a reheater coil to prevent condensation in downstream piping.
Product Details:
| Capacity | 300 CFM |
| Maximum Pressure Bar | 16 |
| Connected Load | 1.80 kW |
| Dimension | 38X32X47 Inch (LXWXH) |
| Brand | Empire |
| Model No | ECLD-030 |
Warm, Moist Air Enters:
Compressed air from the compressor is warm and contains water vapor.
Pre-Cooling (Optional in Some Models):
In some models, incoming warm air is pre-cooled by outgoing cold air using a heat exchanger.
Refrigeration Cycle:
The air passes through an evaporator where a refrigerant cools it down, typically to around 3°C (37°F).
At this temperature, water vapor condenses into liquid.
Moisture Separation:
The condensed water is removed by a moisture separator and drained out via an automatic drain valve.
Reheated and Out:
The dry, cold air is reheated by the incoming air or by a reheater coil to prevent condensation in downstream piping.
Product Details:
| Capacity | 250 CFM |
| Model No | ECLD-025 |
| Brand | Empire |
| Maximum Pressure Bar | 16 |
| Connected Load | 1.70 kW |
| Dimensions | 34x28x41 Inch (LXWXH) |
Warm, Moist Air Enters:
Compressed air from the compressor is warm and contains water vapor.
Pre-Cooling (Optional in Some Models):
In some models, incoming warm air is pre-cooled by outgoing cold air using a heat exchanger.
Refrigeration Cycle:
The air passes through an evaporator where a refrigerant cools it down, typically to around 3°C (37°F).
At this temperature, water vapor condenses into liquid.
Moisture Separation:
The condensed water is removed by a moisture separator and drained out via an automatic drain valve.
Reheated and Out:
The dry, cold air is reheated by the incoming air or by a reheater coil to prevent condensation in downstream piping.
Product Details:
| Capacity | 400 CFM |
| Maximum Pressure Bar | 16 |
| Connected Load | 2.40 kW |
| Dimensions | 48x26x39 Inch (LXWXH) |
| Brand | Empire |
| Model No | ECLD-040 |
Warm, Moist Air Enters:
Compressed air from the compressor is warm and contains water vapor.
Pre-Cooling (Optional in Some Models):
In some models, incoming warm air is pre-cooled by outgoing cold air using a heat exchanger.
Refrigeration Cycle:
The air passes through an evaporator where a refrigerant cools it down, typically to around 3°C (37°F).
At this temperature, water vapor condenses into liquid.
Moisture Separation:
The condensed water is removed by a moisture separator and drained out via an automatic drain valve.
Reheated and Out:
The dry, cold air is reheated by the incoming air or by a reheater coil to prevent condensation in downstream piping.
Product Details:
| Minimum Order Quantity | 01 Piece |
| Air Capacity(CFM) | 500 |
| Automation Grade | Automatic |
| Voltage | 415 V |
| Dryer Type | Regenerative Desiccant Dryer |
| Connected Load | 1.5 kW |
| Brand | Empire |
A Heatless Air Dryer is a type of desiccant air dryer that removes moisture from compressed air without using external heat. It’s especially useful for achieving very low dew points, typically down to -40°C to -70°C (-40°F to -94°F), which refrigerant dryers can't reach.